36 lines
976 B
Plaintext
36 lines
976 B
Plaintext
-------------------------------------------------------------------------------
|
|
|
|
$Id$
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
This is a minimal example application for the use of the EtherCAT
|
|
master realtime RTDM interface with an XENOMAI NATIVE thread.
|
|
|
|
The application expects an XENOMAI installation. Configure the master sources
|
|
specifying --enable-rtdm --with-xenomai-dir to have the right include paths.
|
|
|
|
Most probably you'll have different EtherCAT slaves present. Try adjusting the
|
|
section "process data" in main.c to your bus configuration.
|
|
|
|
There are some features that can be disabled by commenting out the respective
|
|
defines at the head of main.c.
|
|
|
|
---
|
|
|
|
To build the example, call:
|
|
|
|
make
|
|
|
|
To run it, preload the EtherCAT RTDM module:
|
|
|
|
modprobe ec_rtdm
|
|
|
|
and call as root:
|
|
|
|
./ec_xenomai_example
|
|
|
|
...and watch the system logs for the outputs.
|
|
|
|
-------------------------------------------------------------------------------
|