117 lines
5.6 KiB
Plaintext
117 lines
5.6 KiB
Plaintext
-------------------------------------------------------------------------------
|
|
|
|
$Id$
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
Changes in version 1.3.0:
|
|
|
|
* Added Intel PRO/1000 gigabit ethernet driver (e1000).
|
|
* Added testing version of Intel PRO/100 ethernet driver (e100).
|
|
* Added testing version of NVIDIA nForce ethernet driver (forcedeth).
|
|
* Removed "ec_eoeif_count" master module parameter. EoE handlers are created
|
|
dynamically instead.
|
|
* Added "main" and "backup" parameters to master module to hand over the
|
|
MAC addresses of the devices to wait for. This made the ec_device_index
|
|
parameter of the ethernet drivers obsolete. The broadcast MAC address means,
|
|
that the master accepts the first device offered by any ethernet driver.
|
|
* Changed format of sysconfig file and accordingly adjusted functionality
|
|
of the init script to handle the above MAC address lists.
|
|
* Realtime interface changes:
|
|
- ecrt_master_run() became obsolete, because the master state machine is now
|
|
run in process context.
|
|
- Parameter changes in PDO registration functions ecrt_domain_register_pdo()
|
|
and ecrt_register_pdo_range(): Replaced slave_address, vendor ID and
|
|
product code arguments with a slave pointer, which has to be obtained with
|
|
a prior call to ecrt_master_get_slave().
|
|
- ecrt_master_get_slave() got additional parameters to check for vendor ID
|
|
and product code.
|
|
- Removed addressing scheme "X:Y" for ecrt_master_get_slave().
|
|
- Added ecrt_master_get_slave_by_pos() to avoid the string handling of
|
|
ecrt_master_get_slave().
|
|
- Added ecrt_master_get_status() to get status information about the bus.
|
|
- Added functions to set up an alternative PDO mapping for a slave, i. e.
|
|
ec_slave_pdo_mapping_clear(), ec_slave_pdo_mapping_add() and
|
|
ec_slave_pdo_mapping().
|
|
* Device interface changes:
|
|
- Replaced ecdev_register() and ecdev_unregister() with ecdev_offer() and
|
|
ecdev_withdraw(), respectively. The device modules now offer all their
|
|
devices to the master. The master then decides, which ones to register.
|
|
- Replaced ecdev_link_state() with ecdev_set_link(); added ecdev_get_link().
|
|
* All EEPROM write operations from user space are now blocking until
|
|
writing has finished. Appropriate error codes are returned.
|
|
* Implemented setting of the "Secondary slave address" (alias) via sysfs.
|
|
* Implemented SDO reading in operation mode via sysfs.
|
|
* Removed annoying eeprom_write_enable file. EEPROM writing always enabled.
|
|
* Slave configuration is now done exclusively from the master thread. Removed
|
|
ec_master_sync_io(). Userspace threads are now waiting for events in the
|
|
state machine.
|
|
* Master state machine scheduled with timeout if idle, otherwise is executed
|
|
as fast as possible (with schedule()).
|
|
* Added dummy module for simulation purpuses.
|
|
* Limited infinite EEPROM reading, if 0xffff limiter word is missing.
|
|
* Init script works now properly on non-SUSE distros (no rc.status dependency
|
|
any more).
|
|
* Removed EtherCAT line comments from 8139too drivers.
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
Changes in version 1.2.0:
|
|
|
|
* Serveral fixes of bugs and stability issues. Master should now run fine
|
|
with kernels 2.6.17 to 2.6.19.
|
|
* Realtime interface changes:
|
|
- Re-introduced ecrt_domain_queue() to allow datagram queuing apart
|
|
from datagram processing. The queuing of a domain's datagrams is not
|
|
done in ecrt_domain_process() any more!
|
|
- Removed ecrt_master_deactivate(). Its functionality was moved into
|
|
ecrt_master_release().
|
|
- Removed ecrt_master_prepare(). Its functionality was moved into
|
|
ecrt_master_activate().
|
|
- Renamed ecdev_start() and ecdev_stop() to ecdev_open() and ecdev_close().
|
|
These two functions now take a pointer to ec_device_t as their arguments.
|
|
- The data_ptr parameter of ecrt_domain_register_pdo(),
|
|
ecrt_domain_register_pdo_list() and ecrt_domain_register_pdo_range() may
|
|
not be NULL any more.
|
|
- Removed ecrt_slave_pdo_size(). This function was deprecated long before.
|
|
- Introduced ECRT_VERSION_MAGIC macro and ecrt_version_magic() function.
|
|
* Device interface changes:
|
|
- ec_isr_t was replaced by ec_pollfunc_t, the device driver has to supply
|
|
a poll function to call its ISR. This was introduced because some network
|
|
drivers' interrupt functions have different arguments.
|
|
* State machines now try to re-send datagrams on datagram timeout.
|
|
* New option -c of the lsec script, displays slave current consumptions and
|
|
remaining current.
|
|
* Added frame counter in master info file.
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
Changes in version 1.1.1:
|
|
|
|
* State change FSM: Clearing of sync managers before PREOP.
|
|
* Added modules_install make target.
|
|
* Device modules for kernel 2.6.17.
|
|
* SDO configurations available in Sysfs.
|
|
* FMMU configurations cleared when going to INIT.
|
|
* Slave-specific logs only at debug level 1 (for large busses).
|
|
* Slave flags (error, online) available in Sysfs.
|
|
* Acknowledging of spontaneous state changes in master FSMs.
|
|
* ecrt_master_deactivate() deprecated.
|
|
* Persistent slave lists. Slave structures are only regenerated on topology
|
|
change in IDLE mode.
|
|
* SDO reading via Sysfs.
|
|
* Added ecrt_domain_register_pdo_range()
|
|
* Fetching of SDO dictionary.
|
|
* Better timing behaviour when starting up under high CPU load.
|
|
* Applied Autotools.
|
|
* Improved output of lsec.
|
|
* SDO download state machine.
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
Changes in version 1.1:
|
|
|
|
* Improved realtime interface.
|
|
|
|
-------------------------------------------------------------------------------
|