This is the README file of the IgH EtherCAT Master.

vim: spelllang=en spell tw=78

Contents:

• General Information
• Requirements
• Building and Installing
• Realtime and Tuning
• License
• Coding Style

General Information

This is an open-source EtherCAT master implementation for Linux 2.6 or newer.

See the features file for a list of features. For more
information, see http://etherlab.org/en/ethercat.

or contact

Dipl.-Ing. (FH) Florian Pose fp@igh.de
Ingenieurgemeinschaft IgH
Nordsternstraße 66
D-45329 Essen
http://igh.de

Documentation

Handbook

The PDF documentation is generated via LaTeX and can be build with the
following steps:

cd documentation
make

The PDF is automatically held up-to-date and can be downloaded from
GitLab.

Doxygen

To generate the Doxygen documentation, the following commands can be used.
Therefore, the configure script must have run (see the install
file).

git submodule update --init
make doc

An up-to-date Doxygen output can be found on
docs.etherlab.org.

Requirements

Software requirements

Configured sources for the Linux 2.6 (or newer) kernel are required to build
the EtherCAT master.

Hardware requirements

A table of supported hardware can be found at
http://etherlab.org/en/ethercat/hardware.php.

Building and installing

See the install file.

Realtime and Tuning

Realtime patches for the Linux kernel are supported, but not required. The
realtime processing has to be done by the calling module (see API
documentation). The EtherCAT master code itself is passive (except for the
idle mode and EoE).

To avoid frame timeouts, deactivating DMA access for hard drives is
recommended (hdparm -d0 <DEV>).

License

Copyright (C) 2006-2023 Florian Pose, Ingenieurgemeinschaft IgH

This file is part of the IgH EtherCAT Master.

The IgH EtherCAT Master is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License version 2, as
published by the Free Software Foundation.

The IgH EtherCAT Master is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
details.

You should have received a copy of the GNU General Public License along with
the IgH EtherCAT Master; if not, write to the Free Software Foundation, Inc.,
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA

---

The license mentioned above concerns the source code only. Using the EtherCAT
technology and brand is only permitted in compliance with the industrial
property and similar rights of Beckhoff Automation GmbH.

Coding Style

Developers shall use the coding style rules in the coding style
file.