45 lines
1.6 KiB
Plaintext
45 lines
1.6 KiB
Plaintext
#------------------------------------------------------------------------------
|
|
#
|
|
# EtherCAT master sysconfig file
|
|
#
|
|
# $Id$
|
|
#
|
|
#------------------------------------------------------------------------------
|
|
|
|
#
|
|
# Master device and backup-device settings.
|
|
#
|
|
# The MASTERX_DEVICE variable specifies the ethernet device for master 'X',
|
|
# while the MASTERX_BACKUP variable specifies the backup ethernet device for
|
|
# redundancy purposes.
|
|
#
|
|
# There are three formats for specifying ethernet devices:
|
|
# 1) MAC address (example: "00:00:08:44:ab:66"). Specify the MAC address of
|
|
# the ethernet card to use.
|
|
# 2) PCI bus address (example: "01:1c.0"). Specify the PCU bis address of the
|
|
# ethernet card to use.
|
|
# 3) Driver and device index (example: "8139too:0"). Currently there are two
|
|
# drivers available: "8139too" and "e100". The device index is the index
|
|
# into driver-supported PCI cards.
|
|
#
|
|
# The MASTERX_DEVICE variables also determine, how many masters will be
|
|
# created: A non-empty variable MASTER0_DEVICE will create one master, adding
|
|
# a non-empty variable MASTER1_DEVICE will create a second master, and so on.
|
|
#
|
|
MASTER0_DEVICE=
|
|
MASTER0_BACKUP=
|
|
|
|
#
|
|
# Ethernet driver modules to replace with EtherCAT-capable ones.
|
|
#
|
|
# The init script will try to unload the ethernet driver modules in the list
|
|
# and replace them with the EtherCAT-capable ones, respectively. If a certain
|
|
# (EtherCAT-capable) driver is not found, a warning will appear.
|
|
#
|
|
# Remove all unused driver modules to prevent unnecesessary module
|
|
# replacement.
|
|
#
|
|
DEVICE_MODULES="8139too e100 forcedeth"
|
|
|
|
#------------------------------------------------------------------------------
|